HP Pavilion a387x Desktop PC - Manual (Page 137)

upgrading and servicing the pc (2) 129
6 To prepare an empty card slot for a new card, loosen the screw of the
expansion slot cover of the empty slot (E). Remove the expansion slot cover of
the empty slot.
E
WARNING: Be careful of the sharp edges on the expansion slot
cover.
7 If you are replacing a card, disconnect any external and/or internal cables
attached to the card.
8 Loosen the screw on the bracket of the card you are replacing (F).
9 Hold the metal bracket and the far top corner of the card. Carefully remove
the card by pulling the card straight out of the expansion slot.
10 Insert the new card into the slot and push straight down. Make sure the card
is properly seated.