HP ProLiant DL365 Server - Manual (Page 8)

Component identification 8
Item Description
8
Hard drive bay 3
9 Hard drive bay 2
10 Hard drive bay 1
11 Serial pull tab
*An optional controller is required when the server is configured with six hard drives.
Front panel LEDs and buttons
Item Description Status
1 Power On/Standby button
and system power LED
Green = System is on.
Amber = System is shut down, but power is still applied.
Off = Power cord is not attached, power supply failure has
occurred, no power supplies are installed, facility power is not
available, or disconnected power button cable.
2 UID button/LED Blue = Identification is activated.
Flashing blue = System is being remotely managed.
Off = Identification is deactivated.
3 Internal health LED Green = System health is normal.
Amber = System health is degraded. To identify the component in
a degraded state, refer to "HP Systems Insight Display and LEDs".
Red = System health is critical. To identify the component in a
critical state, refer to "HP Systems Insight Display and LEDs".
Off = System health is normal (when in standby mode).
4 External health LED
(power supply)
Green = Power supply health is normal.
Amber = Power redundancy failure occurred.
Off = Power supply health is normal when in standby mode.