HP ProLiant DL365 Server - Manual (Page 50)

Hardware options installation 50
2. Turn the quarter-turn fasteners clockwise.
Upgrading an HP Smart Array E200i Controller cache module and battery pack
Use this procedure to upgrade the standard memory module to an optional memory module with a battery
pack.
1. Power down the server (on page 18 ).
2. Extend the server from the rack (on page 19 ).
3. Remove the access panel (on page 20 ).
4. Remove the air baffle (" Remove and install the air baffle " on page 20 ).
5. Disconnect the hard drive backplane power cable.
6. Remove the existing cache module.