HP ProLiant DL365 Server - Manual (Page 14)

Component identification 14
HP Systems Insight
Display LED and color
Internal health LED
color
Status
DIMM failure, slot X
(amber)
Red One or more of the following conditions may exist:
• DIMM in slot X has failed.
• DIMM in slot X is an unsupported type, and no valid
memory exists in another bank.
Amber One or more of the following conditions may exist:
• DIMM in slot X has reached single-bit correctable
error threshold.
• DIMM in slot X is in a pre-failure condition.
• DIMM in slot X is an unsupported type, but valid
memory exists in another bank.
DIMM failure, all slots
(amber)
Red No valid or usable memory is installed in the system.
Overtemperature (amber) Amber The health driver has detected a cautionary temperature
level.
Red The server has detected a critical temperature level.
Riser interlock (amber) Red The PCI riser board assembly is not seated properly.
Fan module (amber) Amber A redundant fan has failed.
Fan module (amber) Red The minimum fan requirements are not being met in one
or more of the fan modules. One or more fans have failed
or are missing.
SAS and SATA device numbers
• Four hard drive configuration