HP ProLiant DL365 Server - Manual (Page 72)

Configuration and utilities 72
For more information on ProLiant USB support, refer to the HP website
( http://www.compaq.com/products/servers/platforms/usb-support.html ).
Changing the USB version support
The factory default setting for this server is USB version 1.1. After the OS has loaded, this setting can be
changed to USB version 2.0 using the following steps:
1. Access RBSU by pressing F9 during power up.
2. Select System Options.
3. Select USB External Port Capability.
4. Press Enter to display USB 1.1 and USB 2.0 selections.
5. Arrow down to highlight USB 2.0.
6. Press Enter.
7. Press F10 to save the change and exit RBSU.
Internal USB functionality
An internal USB connector is available for use with USB drive keys only. This solution provides for use of
a permanent boot drive from a USB drive key installed in the internal connector, avoiding issues of
clearance on the front of the rack and physical access to secure data.
For additional security, the external USB connectors can be disabled through RBSU. Disabling external
USB in RBSU disables the front USB connector and both rear USB connectors.
Diagnostic tools
Survey Utility
Survey Utility, a feature within HP Insight Diagnostics (on page 73 ), gathers critical hardware and
software information on ProLiant servers.
This utility supports operating systems that may not be supported by the server. For operating systems
supported by the server, refer to the HP website ( http://www.hp.com/go/supportos ).
If a significant change occurs between data-gathering intervals, the Survey Utility marks the previous
information and overwrites the Survey text files to reflect the latest changes in the configuration.
Survey Utility is installed with every SmartStart-assisted installation or can be installed through the HP PSP
(" ProLiant Support Packs " on page 74 ).
NOTE: The current version of SmartStart provides the memory spare part numbers for the server. To
download the latest version, see the HP website ( http://www.hp.com/go/ssdownloads ).
Array Diagnostic Utility
ADU is a tool that collects information about array controllers and generates a list of detected problems.
ADU can be accessed from the SmartStart CD (" SmartStart software " on page 65 ) or downloaded from
the HP website ( http://www.hp.com ).