HP ProLiant DL365 Server - Manual (Page 39)

Hardware options installation 39
Removing hard drive blanks
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
Removing hard drive bezel blanks
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
To remove the component:
1. Remove hard drives 1 and 2 (" Removing a hot-plug SAS or SATA hard drive " on page 40 ).
2. Remove the hard drive bezel blank.