HP ProLiant DL365 Server - Manual (Page 13)

Component identification 13
To view the LEDs, access the HP Systems Insight Display (on page 18 ).
LED Status
Off Normal
Amber Failure
For additional information about these LEDs, see "HP Systems Insight Display LEDs and internal health LED
combinations (on page 13 )."
NOTE: The HP Systems Insight Display LEDs represent the system board layout.
HP Systems Insight Display LEDs and internal health LED
combinations
When the internal health LED on the front panel illuminates either amber or red, the server is experiencing
a health event. Combinations of illuminated system LEDs and the internal health LED indicate system
status.
The front panel health LEDs indicate only the current hardware status. In some situations, HP SIM may
report server status differently than the health LEDs because the software tracks more system attributes.
HP Systems Insight
Display LED and color
Internal health LED
color
Status
Processor failure, socket X
(amber)
Red One or more of the following conditions may exist:
• Processor in socket X has failed.
• Processor X is required yet not installed in the socket.
• Processor X is unsupported.
Amber Processor in socket X is in a pre-failure condition.
Processor failure, both
sockets (amber)
Red Processor types are mismatched.
PPM failure (amber) Red Integrated PPM has failed.