HP 70 Modular Smart Array - Manual (Page 17)

Converting rails for round-hole racks
The rack rails ship configured for square-hole racks. To convert the rack rails for use in a round-hole
rack:
1. Locate the bag of miscellaneous hardware that ships with the rack rails.
2. Locate the eight round-hole pins.
3. Use a No. 2 Phillips screwdriver to remove the standard pins from the front and back ends of
the rail.
4. Install four round-hole pins into the rail.
5. Repeat steps 3 and 4 for the second rail.
70 Modular Smart Array User Guide 17