Msa70 shipping contents, Rack mounting hardware kit contents, 16 rack mounting hardware kit contents – HP 70 Modular Smart Array User Manual
Page 16
WARNING!
To reduce the risk of personal injury or equipment damage when unloading a rack:
•
At least two people are needed to safely unload the rack from the pallet. An empty 42U rack can
weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and may become unstable
when being moved on its casters.
•
Never stand in front of the rack when it is rolling down the ramp from the pallet. Always handle
the rack from both sides.
MSA70 shipping contents
When unpacking the MSA70 enclosure, locate the following items:
•
MSA70 enclosure
•
Rack mounting hardware kit
•
Power cords (2)
•
SAS cable
Rack mounting hardware kit contents
The rack mounting hardware kit provides the required components for quick deployment in
Compaq-branded, HP-branded, and most square- and round-hole third-party racks. The adjustable
feature of the rack rails enables installation in racks with depths of 69.90 to 76.2 cm (27.52 to 30.00
in).
If you are installing the enclosure in an M-Series rack, contact an authorized reseller to obtain an
M-Series Rack Rail option kit.
Description
Item
Rack rail (left)
1
Rack rail (right)
2
Pins for round-hole rack conversion (8)
3
In addition to these supplied items, you may need a No. 2 Phillips screwdriver.
Installing the enclosure
16