HP Access Control - Manual (Page 12)

a. Enter ID code and PIN code on the keypad or touch-screen.
b. Touch OK.
Figure 4-8 PIN and ID code information
3. Touch Print all to print or select documents and then touch Print.
Figure 4-9 “Print all” button
4. To log out, do any of the following:
●
Leave device idle for 60 seconds.
● Press Reset button.
● Touch Sign Out.
● Use card reader.
4.4 Email — log in by card
To use your email to log in by card, complete the following steps:
8 Chapter 4 Using HP Access Control (HP AC) Secure Pull Print on MFPs