HP Access Control - Manual (Page 10)

● Touch Sign Out.
● Leave device idle for 60 seconds.
● Press Reset button.
● Use card reader.
4.2 Pull Print — Windows login
If you have forgotten your card, Windows login may be used. To use your Windows login information to log
into Pull Print, complete the following:
1. Touch HP AC Secure Pull Print.
Figure 4-4 HP AC Secure Pull Print button
2. To log into Windows, enter your login credentials and complete the following steps:
a.
Touch Username and enter Username on the touch-screen. Touch OK.
b. Touch Password and enter Password on the touch-screen. Touch OK
c. Touch Domain and enter Domain on the touch-screen. Touch OK.
d. Touch OK.
Figure 4-5 Windows login credentials
6 Chapter 4 Using HP Access Control (HP AC) Secure Pull Print on MFPs