HP SAN Virtualization Services Platform - Manual (Page 13)

System Insight Display LED combinations
When the health LED on the front panel illuminates either amber or red, the server is experiencing a
health event. Combinations of illuminated Systems Insight Display LEDs, the system power LED, and
the health LED indicate system status.
Table 7 System Insight Display LED combinations
Status System power LED Health LED Systems Insight Display
LED and color
One or more of the following conditions
may exist:
• Processor in socket X has failed.
• Processor X is not installed in the sock-
et.
• Processor X is unsupported.
• ROM detects a failed processor during
POST
Amber Red Processor (amber)
Processor in socket X is in a pre-failure
condition.
Green Amber Processor (amber)
One or more DIMMs have failed. Green Red DIMM (amber)
DIMM in slot X is in a pre-failure condition. Green Amber DIMM (amber)
The Health Driver has detected a caution-
ary temperature level.
Green Amber Overtemperature (amber)
The server has detected a hardware critical
temperature level.
Amber Red Overtemperature (amber)
The PCI riser board assembly is not seated
properly.
Green Red Riser interlock (amber)
One fan has failed or has been removed. Green Amber Fan (amber)
Two or more fans have failed or been re-
moved.
Green Red Fan (amber)
• Only one power supply is installed and
that power supply is in standby.
• Power supply fault
• System board fault
Amber Red Power supply (amber)
• Redundant power supply is installed
and only one power supply is function-
al.
• AC power cord is not plugged into re-
dundant power supply.
• Redundant power supply fault
• Power supply mismatch at POST or
power supply mismatch through hot-
plug addition.
Green Amber Power supply (amber)
HP StorageWorks Virtualization Services Manager v2 server user guide 13