Use access codes, credit cards, or calling cards, Send faxes internationally, Receive a fax – HP LaserJet M1522 Multifunction Printer series User Manual
Page 136: Reprint a fax
8.
Enter the fax number, enter the speed dial, or press the one-touch key.
NOTE:
This feature does not support undefined (ad hoc) groups.
9.
Press
OK
or
Start Fax
. The product scans the document into memory and sends it at the designated
time.
Use access codes, credit cards, or calling cards
To use access codes, credit cards, or calling cards, dial manually to allow for pauses and dialing codes.
See
Manual dial faxing on page 116
Send faxes internationally
To send a fax to an international destination, dial manually to allow for pauses and international dialing
codes. See
Manual dial faxing on page 116
Receive a fax
When the product receives a fax transmission, it prints the fax (unless the private-receive feature is
enabled) and also stores it automatically to flash memory.
Print a stored fax (when private receive feature is on)
To print stored faxes, you must provide the private-receive PIN. Once the product prints the stored faxes,
the faxes are deleted from memory.
1.
On the control panel, press
Setup
( ).
2.
Use the arrow buttons to select Fax setup, and then press
OK
.
3.
Use the alphanumeric buttons to enter the product security PIN, and then press
OK
.
4.
Use the arrow buttons to select Fax Recv. setup, and then press
OK
.
5.
Use the arrow buttons to select Private receive, and then press
OK
.
6.
Use the arrow buttons to select Print faxes, and then press
OK
.
Reprint a fax
If you want to reprint a fax because the print cartridge was empty or if the fax was printed on the wrong
type of media, you can try to reprint it. The amount of memory that is available determines the actual
number of faxes that are stored for reprinting. The most recent fax prints first; the oldest fax that is in
storage prints last.
These faxes are stored continuously. Reprinting them does not clear them from the memory. To clear
these faxes from the memory, see
Delete faxes from memory on page 113
1.
On the control panel, press
Setup
( ).
2.
Use the arrow buttons to select Fax functions, and then press
OK
.
3.
Use the arrow buttons to select Reprint last, and then press
OK
. The product begins reprinting
the most recently printed fax.
NOTE:
To stop the printing at any time, press
Cancel
.
124 Chapter 10 Fax
ENWW