HP LaserJet M1522 Multifunction Printer series - Manual (Page 130)

6. If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
1 to select Yes, and then press OK .
Load Page: X Press OK appears on the control-panel display.
7. If you have already placed the document on the flatbed scanner, press OK (or place the document
on the flatbed scanner and then press OK ).
After scanning the page, Another page? 1=Yes 2=No appears on the control-panel display.
8. If you have more pages to scan, press 1 to select Yes, and then repeat step 7 for each page of the
fax job.
-or-
If you are finished, press 2 to select No.
The product sends the fax to each fax number. If a number in the group is busy or does not answer, the
product redials that number based on the redial setting. If all redial attempts fail, the product updates
the fax activity log by adding the error, and then it proceeds to the next number in the group.
Redial manually
1. Load the document into the automatic document feeder (ADF) input tray or onto the flatbed
scanner.
2. On the control panel, press Redial .
3. Press Start Fax . If the pages that you want to send are in the ADF, then faxing begins automatically.
4. If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
1 to select Yes, and then press OK .
After you press OK , Load page: X Press OK appears on the control-panel display.
5. If you have already placed the document on the flatbed scanner, press OK (or place the document
on the flatbed scanner and then press OK ).
After scanning the page, Another page? 1=Yes 2=No appears on the control-panel display.
6. If you have more pages to scan, press 1 to select Yes, and then repeat step 5 for each page of the
fax job.
-or-
If you are finished, press 2 to select No.
The product sends the fax to the number that it redialed. If the number is busy or does not answer, the
product redials the number based on its redial setting. If all redial attempts fail, the product updates the
fax activity log by adding the error.
118 Chapter 10 Fax ENWW