HP LaserJet M1522 Multifunction Printer series - Manual (Page 131)

Use speed dials and group-dial entries
Send a fax by using a speed dial
1. Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner.
2. Press the one-touch key for the speed dial.
-or-
Press Phone Book , use the alphanumeric buttons to specify the speed-dial entry, and then press
OK .
3. Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner.
4. Press Start Fax . If the pages that you want to send are in the ADF, then faxing begins automatically.
5. If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
1 to select Yes, and then press OK .
After you press OK , Load page: X Press OK appears on the control-panel display.
6. If you have already placed the document on the flatbed scanner, press OK (or place the document
on the flatbed scanner and then press OK ).
After scanning the page, Another page? 1=Yes 2=No appears on the control-panel display.
7. If you have more pages to scan, press 1 to select Yes, and then repeat step 5 for each page of the
fax job.
-or-
If you are finished, press 2 to select No.
When the last page of the fax has exited the product, you can start sending another fax, copying, or
scanning.
You can assign a speed dial to numbers that you use regularly. See Create and edit speed dials
on page 97 . If you have electronic phone books available, you might be able to use them to select
recipients. Electronic phone books are generated by using third-party software programs.
Send a fax by using a group-dial entry
1. Load the document into the automatic document feeder (ADF) input tray or on the flatbed scanner.
2. Press the one-touch key for the group.
-or-
Press Phone Book , use the alphanumeric buttons to specify the group-dial entry, and then press
OK .
3. Press Start Fax . If the pages that you want to send are in the ADF, then faxing begins automatically.
4. If the product ADF sensor detects that no document is loaded into the ADF input tray, Send from
glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the flatbed
scanner, press
1 to select Yes, and then press OK .
After you press OK , Load page: X Press OK appears on the control-panel display.
ENWW Use fax 119