HP XP Continuous Access Software User Manual
Page 238

Table 45 Error Codes and Error Contents When Operating RAID Manager (continued)
Error Contents
Error Code
(SSB2)
Error Code
(SSB1)
The specified XP Continuous Access Journal pair cannot execute the
takeover because the specified XP Continuous Access Journal pair belongs
to the journal group that dedicated XP Continuous Access Journal and XP
Continuous Access combination (2DC configuration).
A delta resync pair cannot be created due to one of the following reasons:
•
P-VOL of the XP Continuous Access Journal pair is different from P-VOL
of the XP Continuous Access pair.
•
The serial number of the primary storage system that is recognized by
P-VOL and S-VOL is different.
EB48
A request of XP Continuous Access Journal Paircreate (journal suspend
mode) was received. However, the command was rejected because the
secondary storage system did not support the delta resync function.
EB49
A pair cannot be created because the restore journal group was not
registered.
EB4C
A pair cannot be created because the master journal group was not
registered.
EB4D
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the specified S-VOL was
not mounted.
EB50
The XP Continuous Access Journal pair cannot be created because PIN
data existed in the specified S-VOL.
EB51
The XP Continuous Access Journal pair cannot be created because the
specified S-VOL cannot be accessed.
EB52
The XP Continuous Access Journal pair cannot be created because the
specified S-VOL is blocked.
EB53
The command was rejected because the specified S-VOL was online with
the host.
EB57
The command was rejected because the specified journal volume or S-VOL
was reserved or being used in the storage system. Check the status of the
volume.
EB58
The command was rejected because the specified S-VOL was being
migrated by XP Auto LUN. Check the status of the volume.
EB59
The XP Continuous Access Journal pair cannot be created because the
access attribute was set to the specified P-VOL or S-VOL by Data Retention
Utility.
EB5B
XP Continuous Access Journal pair cannot be resynchronized because an
internal logical error occurred.
EB5C
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the state of S-VOL was not
SMPL.
EB5E
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the program product of XP
Continuous Access Journal was not installed in the secondary storage
system.
EB5F
A request of XP Continuous Access Journal Paircreate was received.
However, the command was rejected because the volume capacity of
P-VOL was different from the volume capacity of S-VOL.
EB60
EB61
238 Troubleshooting