HP XP Continuous Access Software - Manual (Page 134)

1. In the Display box, select DKC.
2. Select a remote storage system from the tree.
The list shows logical paths. Each row in the list indicates one logical path ( Figure 61 (page
134) ).
Figure 61 Logical Path Information in the DKC Operation Window
The Operation list shows the following information:
Description Item
The path group ID. The icon indicates the status of the path:
•
The logical path is in normal status.
•
A failure occurred at the logical path.
Path Gr. ID
The channel type of the logical paths between the local
storage system and the remote storage system. This column
always indicates Fiber. M-R Path
Indicates whether the logical path is in normal status:
• Normal: The logical path is in normal status. No failure
occurs at the logical path.
•
Failed: A failure occurs at the logical path.
Status
The port number of the local storage system Port
The port number of the remote storage system Pair-Port
Viewing Information about Ports on the Local Storage System
To view information in the DKC Operation window on the local storage system:
134 Using the XP Continuous Access Journal GUI