HP StorageWorks Auto Path VA Software - Manual (Page 28)

28 Command-Line User Interface
autopath adapters
Display host bus adapter names.
Syntax
autopath adapters
Description
The autopath adapters command displays the names of all host bust adapters installed on the host,
even if the adapter is not compatible (non fibre channel) with Auto Path VA. This command displays
the non-compatible adapters with an Active state but 0 (zero) for the number of paths.
Example
C:\...\AutoPath\autopath adapters
Adapter# Port# Adapter Name State #Paths
1 2 HP HHBA–D8602B Active 10
2 4 HP HHBA–D8602B Active 4