HP Integrity NonStop H-Series - Manual (Page 75)

Configuring the LMM Client on the NonStop System
Library Media Manager Installation and User’s Guide— 529970-002
4 -9
Running the Client Processes
Running the Client Processes
Once the LMM client has been configured, the TCP/IP Process Name PARAM needs
to be set and the process executed before you use the GUI to connect to the robot.
To run the LMM client, exit the configuration menu by typing EXIT at the prompt. When
the TACL prompt appears, type the following as shown in
Figure 4-8 .
Figure 4-8. OBEY GO