D interfacing to lmm, D. interfacing to lmm, Command outputs – HP Integrity NonStop H-Series User Manual
Page 159: Mount media command, Table d-1, Detail command byte structure, Interfacing to lmm
Library Media Manager Installation and User’s Guide— 529970-002
D- 1
D
Interfacing to LMM
Command Outputs
This section describes how to structure interprocess commands for use within the
Guardian operating system. Any byte that is not specified with data (an empty byte)
should be specified as a space (see
Mount Media Command
The Mount Media command is used to mount the specified media, by media label to a
transport. To request a specific drive include the Guardian name for the Drive (example
$TAPE1) within the mount request. If no tape drive name is specified, the tape label
will be mounted in the first available drive, if any. If no drive is available, the request is
placed in a queue. For details, see
Table D-1. Detail Command Byte Structure
Argument
No. of Bytes
Command
2
Device Node
10
Device Name
10
Label
8
Drive Node
10
Drive Name
10
Res. 1
20
Res. 2
10
Res. 3
6
AltField 1
10
AltField 2
10
AltField 3
10
AltField 4
10
ErrorCode
2