2 using snmp, Managing snmp ip addresses, Adding an snmp manager ip address – HP XP RAID Manager Software User Manual
Page 9
2 Using SNMP
This topic describes how to use Remote Web Console to manage SNMP Manager IP addresses,
community names, and community IP addresses. It also explains how to test SNMP trap reports.
Managing SNMP IP addresses
Adding an SNMP Manager IP address
Prerequisite: You must have Storage Administrator (Initial Configuration) role to perform this task.
1.
Launch Remote Web Console and log in.
2.
In the Remote Web Console main window, click Settings > Environmental Setting > SNMP IP
Security in the Remote Web Console menu bar. The SNMP IP Security window appears.
3.
Click the Mode Changing icon (
) to change to Modify mode.
4.
In the SNMP IP Security window, click Extension SNMP.
5.
Select IPv4 or IPv6 and specify the version of the IP address you enter.
NOTE:
In SVP, Windows does not support IPv6. If the SVP OS is Windows and you enter
the IPv6 address and click Apply, an error message is displayed and the IPv6 address is not
set.
6.
Enter the desired IP address in the IP Address text box.
Managing SNMP IP addresses
9