Managing community names, Adding a community name, Deleting a community name – HP XP RAID Manager Software User Manual
Page 11: Adding a community name deleting a community name
8.
In the SNMP IP Security window, click Apply to save the changes. A confirmation message is
displayed.
9.
In the confirmation message box, click OK to confirm the changes or click Cancel to exit without
saving the changes.
Managing community names
Adding a community name
Prerequisite: You must have the Storage Administrator (Initial Configuration) role to perform this
task.
1.
Launch Remote Web Console and log in.
2.
In the Remote Web Console menu bar, click Settings > Environmental Setting > SNMP IP
Security. The SNMP IP Security window is displayed.
3.
Click the Mode Changing icon (
) to change to Modify mode.
4.
In the SNMP IP Security window, click Extension SNMP (check box). The Community & Trap
dialog box is displayed.
5.
In the Community & Trap dialog box, right-click Community. The Add Community menu is
displayed.
6.
Select Add Community. The Add Community dialog box is displayed.
7.
In the Community field, enter the desired community name. You can enter up to 180
alphanumeric characters. The following special characters are not allowed: ", \, ;, :, ,, *,
?
, <, >, |, /, ^, &, and %.
8.
Click OK. The new community name is displayed in the Community & Trap dialog box, but
the changes are not yet implemented in the storage system.
9.
To add one or more IP addresses to the new community, see
.
10. Click Apply to save the changes. A confirmation message is displayed.
11. In the confirmation message box, click OK to confirm the changes or Cancel to exit without
saving the changes.
NOTE:
By convention, most equipment is set to use the community string public. You must
set a community string to set a destination for Traps.
Deleting a community name
Prerequisite: You must have the Storage Administrator (Initial Configuration) role to perform this
task.
1.
Launch Remote Web Console and log in.
2.
In the Remote Web Console menu bar, click Settings > Environmental Setting >SNMP IP
Security. The SNMP IP Security window is displayed.
3.
Click the Mode Changing icon (
) to change to Modify mode.
Managing community names
11