HP XP RAID Manager Software User Manual
Hp xp p9000 snmp agent user guide
HP XP P9000 SNMP Agent User Guide
Abstract
This guide describes how to use SNMP to monitor HP XP P9000 disk arrays. The guide lists the monitored storage system
components and supported traps, describes the trap protocol and extension MIB, and explains how to use the GUI to limit
SNMP access to specific SNMP managers. The intended audience is a storage system administrator or authorized service
provider with independent knowledge of HP XP P9000 disk arrays and the HP Remote Web Console.
HP Part Number: AV400-96611
Published: January 2014
Edition: Eleventh
This manual is related to the following products:
Table of contents
Document Outline
- HP XP P9000 SNMP Agent User Guide
- Contents
- 1 Introduction
- 2 Using SNMP
- 3 SNMP supported MIBs
- 4 SNMP failure trap reference
- 5 Troubleshooting
- 6 Support and other resources
- A SNMP GUI reference
- Glossary
- Index