HP Netserver L Server series - Manual (Page 81)

Chapter 10 Configuring the NetServer
75
Use the arrow keys to move the cursor, press ENTER to select an option, and
press ESC to exit.
1. To change adapter settings:
•
Select an adapter from the list in the Main Menu
•
Select "Adapter Setup". This option configures the SCSI ID setting
and other advanced adapter settings.
2. To format a hard disk or change hard disk parameters:
•
Select an adapter from the list in the Main Menu
•
Select "Device Selections"
•
Select the hard disk to format
•
Select "format" menu option
For more details, including default settings, refer to Information Assistant on the
HP NetServer Online Documentation CD-ROM.
ISA Non-Plug-and-Play Boards (Optional)
Reserving Resources for ISA Non-Plug-and-Play Boards
If you have installed an ISA non-Plug-and Play accessory board, you must
reserve system resources for it. Turn on the monitor and the NetServer, and start
the Setup utility by pressing the F2 key when
Press to enter SETUP
appears on the boot screen.
NOTE Pressing the F2 key when prompted should start the Setup
utility. For some ISA boards, the Setup utility will not start,
and you must remove the ISA board, use the Setup utility to
reserve system resources for the ISA board, and reinstall the
ISA board.
Use the Setup utility to allocate system resources to the ISA non-Plug-and-Play
accessory board.