HP Netserver L Server series - Manual (Page 23)

17
4 Accessory Boards
The HP NetServer accepts PCI and ISA accessory boards connected to the I/O
Board. An accessory board can be identified by the offset of the bracket and the
shape of the edge connector (see Figure 4-1).
PCI Board- Left-Side Offset
ISA Board- Right-Side Offset
Figure 4-1. I/O Board with Devices and Bus Structure
The I/O Board
The I/O board is located under cover 1 and is shown in Figure 4-2. The I/O board
contains:
•
The Remote Management connector, linking the I/O board to the external
connector on the rear panel.
•
The I/0 Memory slot, which contains cache memory used by the Intel
i960RD I/O processor.
•
The SE SCSI connector, which services any single-ended SCSI device
installed in the internal (non-hot-swap) trays.
•
The PCI Board slots, which are eight connectors that accept PCI boards.
•
The ISA Board slot, which accepts a single ISA board. This slot is shared
with PCI slot 1. Either slot can be occupied, but not both.
•
The two SCSI connectors, A and B.