HP Netserver L Server series - Manual (Page 64)

Chapter 8 Installing the NetServer in an HP Rack System/E or Rack System/U
58
3. Depress the slide lockout latches, and push the NetServer completely into
the rack (see Figure 8-12).
Figure 8-12. Slide Lockout Releases, Bezel Latch, and Bezel Hinge
4. Install two screws through the bezel hinge into the rack nuts on the left
column (see Figure 8-13).
5. Install two screws through the bezel latch into the rack nuts on the right
column (see Figure 8-13).