HP Netserver L Server series - Manual (Page 51)

45
8 Installing the NetServer in an HP
Rack System/E or Rack System/U
This chapter lists the steps required to install the rack-optimized HP NetServer
LH 4r (see Figure 8-1) in an HP Rack System/E/U.
NOTE The pedestal mounted HP NetServer LH 4 cannot be rack
installed without a conversion kit. Contact your HP reseller for
information about the HP NetServer LH 4 to LH 4r
Conversion Kit.
Figure 8-1. NetServer Configurations
Steps for installing the NetServer in an HP Systems rack are listed in Appendix
A, "Installing the NetServer in an HP Systems Rack."
If you are mounting the NetServer in a non-HP rack, refer to the separate rack
mounting guide for third party racks. It is packed in the accessories tray in the
HP NetServer’s shipping box.