HP Netserver L Server series - Manual (Page 66)

Chapter 8 Installing the NetServer in an HP Rack System/E or Rack System/U
60
7. Attach the z-brackets to the rear columns with two Torx screws, using the
T25 Torx driver. Fasten the bracket to the NetServer with two Torx
screws (see Figure 8-15).
8. Slide the anti-tip foot into the rack.
9. Return to the HP NetServer Rack Installation Roadmap to complete the
rack installation.
Figure 8-15. Attaching the z-brackets to the NetServer and Rear Columns