HP OmniBook XE2-DB Notebook PC - Manual (Page 30)

Using the OmniBook
Expanding the OmniBook
30 Setup Guide
5. Replace the RAM expansion module door.
6. Insert the battery.
To remove RAM modules
After you remove the RAM expansion cover, do the following:
1. Release the two latches at the sides of the RAM expansion module by pushing
them gently outward (away from the sides of the module).
2. When you release the latches, the free edge of the module pops up.
3. Pull the module out of the connector.
4. Replace the RAM expansion module door.