2 installation requirements, 1 kickstart template editing, Minimum firmware versions – HP StorageWorks Scalable File Share User Manual
Page 20
For the minimum firmware versions supported, see
Upgrade the firmware versions, if necessary. You can download firmware from the HP IT
Resource Center on the HP website at:
Table 3-1 Minimum Firmware Versions
Minimum Firmware Version
Component
I.10.43, 08/15/2007
HP J4903A ProCurve Switch 2824
J00P19
Code Version
MSA2000fc Storage Controller
F300R21
Memory Controller
15.010
Loader Version
W420R35
Code Version
MSA2000fc Management Controller
12.013
Loader Version
2042
Code Version
MSA2000fc Enclosure Controller
LCA 55
Hardware Version
MSA2000fc RAID Controller
Hardware
27
CPLD Version
26
Host Interface Version
2.6.14
Kernel
SAN Switch
v5.3.0
Fabric OS
4.6.4
BootProm
P56 1/24/2008
BIOS
DL380 G5 Server
1.60 7/11/2008
iLO
v2.5.0
IB ConnectX NIC MT 25418
Mezzanine Card (448262-B21)
v1.0.5
4X DDR IB Switch Module for HP
c-Class BladeSystem (410398-B21)
v5.1.0-870 6/12/2008
Software
IB Switch ISR 9024 D-M DDR
v1.0.0.6
Firmware
3.2 Installation Requirements
A set of HP SFS G3.0-0 file system server nodes should be installed and connected by HP in
accordance with the HP SFS G3.0-0 hardware configuration requirements.
The file system server nodes use the Red Hat Enterprise Linux 5 Update 2 (RHEL5U2) Software
as a base. The installation process is driven by the Red Hat Kickstart process, which is used to
ensure that required RPMs from RHEL5U2 are installed on the system.
3.2.1 Kickstart Template Editing
A Kickstart template file called sfsg3DVD.cfg is supplied with HP SFS G3.0-0. This file can be
found in the top-level directory of the HP SFS G3.0-0 DVD, and is also present on an installed
system in /opt/hp/sfs/scripts/sfsg3DVD.cfg. The sfsg3DVD.cfg file must be copied
from the DVD, edited, and made available during installation.
This file must be modified by the installer to do the following:
•
Set up the time zone.
•
Specify the system installation disk device and other disks to be ignored.
20
Installing and Configuring HP SFS Software on Server Nodes