HP StorageWorks Scalable File Share User Manual

Page 17

# forostmsas create vdisk level raid6 disks 16-26 spare \
27 vdisk2 ; done

NOTE:

For MGS and MDS nodes, HP SFS uses RAID10. An example MSA2000 CLI

command to do this is:

# formdsmsas create vdisk level raid10 disks 0-4:5-89 spare 10,11

vdisk1

# forallmsas show vdisks ; done

Make a note of the size of the vdisks and use that number in the following step.

Create a volume to fill each vdisk. For example:

# forostmsas create volume vdisk vdisk1 size size \
mapping 0-1.5 volume1 ; done

# forostmsas create volume vdisk vdisk2 size size \
mapping 0-1.6 volume2 ; done

# formdsmsas create volume vdisk vdisk1 size size \
mapping 0-1.4 volume1 ; done

# forallmsas show volumes ; done

Reboot the file system servers to discover the newly created volumes.

2.3 Using the CLI to Configure Multiple MSA2000 Arrays