HP StorageWorks XP Remote Web Console Software - Manual (Page 67)

• BB: The group number of host group
• CCC: LU number
• XX:YY:ZZ: LDKC number:CU number:LDEV number
Note: An LDEV number that ends with a # indicates that the LDEV is an external volume
(for example, 00:00:01#). An LDEV number that ends with the letter X indicates that the
LDEV is a virtual volume used by XP Thin Provisioning (for example, 00:00:00X). For details
regarding external volumes, see the HP StorageWorks XP24000 External Storage Software
User’s Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000
Thin Provisioning Software User’s Guide.
• Emulation: emulation type
• Capacity(MB): storage capacity of the XP Snapshot pair
• CLPR(P): cache logical partition of the P-VOL
• CLPR(S): cache logical partition of the S-VOL
• OK button
Closes the Pairsplit-S dialog box and displays the list of XP Snapshot pairs in the Preview list.
• Cancel button
Cancels the operation and closes the Pairsplit-S dialog box.
Note: For details about the Pairsplit-S dialog box that will be displayed when you select Business Copy
pairs, see the HP StorageWorks XP24000 Business Copy Software User’s Guide.
Deleting XP Snapshot Pairs by Selecting the Pairs per Pool
To delete XP Snapshot pairs by selecting the pairs per pool:
1. Start the Remote Web Console and display the Remote Web Console main window.
2. Change the mode of the Remote Web Console to Modify.
If the mode is already changed to Modify, you can skip this step. For information on how to
change the mode, see the HP StorageWorks XP24000 Remote Web Console User’s Guide.
3. Display the XP Snapshot window ( Figure 8 on page 42) of Business Copy.
4. In the tree, select the pool that contains the XP Snapshot pairs you want to delete.
The list of the pairs or volumes is displayed in the volume list.
5. Select and right-click the XP Snapshot pairs you want to delete.
A pop-up menu is displayed.
6. Select the Pairsplit-S command from the pop-up menu.
The Pairsplit-S dialog box ( Figure 19 on page 66) is displayed.
7. Click OK.
The Pairsplit-S dialog box closes and a list of the XP Snapshot pairs that you are going to delete
is displayed in the Preview list of the XP Snapshot window.
8. Click Apply.
A confirmation message is displayed asking if it is OK to apply the setting to the storage system.
9. Click OK.
The confirmation message closes and the deletion of the pair is applied to the subsystem.
Viewing Detailed Volume and Pair Information
To display the Detail dialog box:
1. Display Business Copy’s Pair Operation window.
2. Select and right-click an XP Snapshot pair on the volume list.
A pop-up menu is displayed.
3. Select the Detail command from the menu.
The Detail dialog box is displayed.
XP24000 Snapshot User's Guide 67