HP StorageWorks XP Remote Web Console Software - Manual (Page 46)

Table 22 Pop-up Menus of the Pool Tree
Menu Function
When you
right-click the
XP Snapshot
icon:
New Pool
Opens the New Pool dialog box ( Figure 13 on page 55). You can
select this pop-up menu command only when you right-click the XP
Snapshot icon.
Delete Pool(s)
Deletes multiple pools at a time. You can select this pop-up menu
command only when the pools that can be deleted exist.
Restore Pool(s)
Recovers multiple blocked pools to the normal status at a time. You
can select this pop-up menu command only when the blocked pools
exist.
However, note that you cannot select this command when the pool is
blocked because its utilization ratio is 100% (that is, POOL FULL).
When you
right-click the
pool icon:
Change Pool
Information
Opens the Change Pool Information dialog box
( Figure 14 on page 56).
Delete Pool Deletes the pool.
Restore Pool
Recovers the blocked pool to the normal status. You can select
this pop-up menu command only when you right-click the blocked
pool icon.
However, note that you cannot select this command when the pool is
blocked because its utilization ratio is 100% (that is, POOL FULL).
• Pool-VOL list
Information about the pool-VOLs that are registered in the pool selected in the Pool tree. The
following items are displayed in the list.
• LDKC:CU:LDEV: LDKC number, CU number, and LDEV number of the pool-VOL
Note: An LDEV number that ends with a # indicates that the LDEV is an external volume
(for example, 00:00:01#). An LDEV number that ends with the letter X indicates that the
LDEV is a virtual volume used by XP Thin Provisioning (for example, 00:00:00X). For details
regarding external volumes, see the HP StorageWorks XP24000 External Storage Software
User’s Guide. For information about XP Thin Provisioning, see the HP StorageWorks XP24000
Thin Provisioning Software User’s Guide.
• Capacity: capacity of the pool-VOL
• Emulation: emulation type of the pool-VOL
• RAID: RAID level (--- will be displayed in case of an external volume)
• PG: parity group to which the pool-VOL belongs
• Int. VOL Info: drive type of internal volumes (nothing will be displayed in case of FC, and --­
will be displayed in case of an external volume)
• EX-VOL Info: drive type of external volumes (nothing will be displayed in case of FC, * will be
displayed in case of SATA or BD, and --- will be displayed in case of an internal volume)
• Total Capacity: total capacity of the pool-VOLs in the pool
• Used LDEVs: total number of the pool-VOLs in the pool
• Remaining LDEVs: total number of the pool-VOLs that you can add to the pool
• Add Pool-VOL button
Adds the selected volume(s) in the Free LDEVs list as pool-VOL(s) to the pool that you selected
from the Pool tree.
• LDKC drop-down list
If you select an LDKC from the drop-down list, only the CUs in the selected LDKC will be displayed
in the CU drop-down list.
• CU drop-down list
46 Using the XP Snapshot GUI