HP ProLiant ML350 G6 Server - Manual (Page 65)

Hardware options installation 65
3. Remove the silver shipping screw from the chassis.
4. Install the silver shipping screw into the full-height device.
Redundant fan assembly option
To install the component:
1. Power down the server (on page 24 ).
2. Do one of the following:
o Open or remove the tower bezel, as needed (" Open or remove the tower bezel " on page 25 ).
o Extend the server from the rack (on page 24 ).
3. Remove the access panel (on page 26 ).
4. Remove the fan blank from fan bay 4 (" Remove a fan blank " on page 29 ).