HP ProLiant ML350 G6 Server - Manual (Page 57)

Hardware options installation 57
Eight-bay SFF drive cage option
Before installing the optional SFF hard drive cage, you must install an optional SAS controller. See the
instructions that ship with the option.
CAUTION: To avoid damage to the pin connectors, install only supported hard drive cages and
components in HP ProLiant ML350 G6 Servers. For supported options, see the QuickSpecs at the
HP website (
http://www.hp.com/servers/proliantml350 ).
To install the component:
1. Install the hard drive expansion cage power cable (" Installing a hard drive expansion cage power
cable " on page 54 ).
2. Remove the two bezel blanks closest to the primary hard drive cage.
3. Using a T-15 Torx screwdriver, remove the sleeve from the optional hard drive cage.
4. Connect the SAS cables to the optional hard drive cage.