beautypg.com

Usb support, Redundant rom support, Safety and security benefits – HP ProLiant SL4540 Gen8 Server User Manual

Page 57: Keeping the system current, Drivers

background image

Software and configuration utilities 57

USB support

HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided by

the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB

devices through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available normally.

Specifically, HP provides legacy USB functionality for the following:

POST

RBSU

Diagnostics

DOS

Operating environments which do not provide native USB support

Redundant ROM support

The node enables you to upgrade or configure the ROM safely with redundant ROM support. The node has

a single ROM that acts as two separate ROM images. In the standard implementation, one side of the ROM
contains the current ROM program version, while the other side of the ROM contains a backup version.

NOTE:

The server ships with the same version programmed on each side of the ROM.

Safety and security benefits

When you flash the system ROM, ROMPaq writes over the backup ROM and saves the current ROM as a

backup, enabling you to switch easily to the alternate ROM version if the new ROM becomes corrupted for

any reason. This feature protects the existing ROM version, even if you experience a power failure while
flashing the ROM.

Keeping the system current

Drivers

IMPORTANT:

Always perform a backup before installing or updating device drivers.

The node includes new hardware that may not have driver support on all OS installation media.
Drivers, ROM images, and value-add software can be downloaded as part of an SPP ("

HP Service Pack for

ProLiant

" on page

52

). If you are installing drivers from SPP, be sure that you are using the latest SPP version

that your node supports. To verify that your node is using the latest supported version and for more

information about SPP, see the HP website (

http://www.hp.com/go/spp/download

).

To locate the drivers for a particular node, go to the HP website (

http://www.hp.com/go/hpsc

) and click on

Drivers, Software & Firmware. Then, enter your product name in the Find an HP product field and click Go.