HP StorageWorks XP Remote Web Console Software - Manual (Page 223)

Table 70 GDPS TrueCopy for Mainframe-Compatible XRC Matrix (continued)
XP12000/XP10000 Disk
Array
XP24000/XP20000 Disk
Array
IBM 3990-6E zSeries and S/390 Feature
XP24000/XP20000 Disk
Array and
XP12000/XP10000 Disk
Array to
XP24000/XP20000 Disk
Array and
XP12000/XP10000 Disk
Array. XP24000/XP20000 Disk
Array and
XP12000/XP10000 Disk
Array to
XP24000/XP20000 Disk
Array and
XP12000/XP10000 Disk
Array. 3990-6 to 3990-6 Hardware based
Communication via switch
and extender using Fibre
Channel and Fibre Channel
cable Communication via switch
and extender using Fibre
Channel and Fibre Channel
cable ESCON − max of 43 km
Communication via channel
extenders
Interface between storage
systems
Synchronous, asynchronous
The default for IBM software
commands is synchronous.
Synchronous, asynchronous
The default for IBM software
commands is synchronous.
Synchronous Copy modes supported
Not Supported. Dual Copy
is not supported by storage
system. Not Supported. Dual Copy
is not supported by storage
system. Supported Dual Copy combination
support
Supported.
Some additional options
only available via the
Remote Web Console/SVP.
Supported.
Some additional options
only available via the
Remote Web Console/SVP.
Supported TSO command Support
Supported.
Some additional options
only available via the
Remote Web Console/SVP.
Supported.
Some additional options
only available via the
Remote Web Console/SVP.
Supported ICKDSF command support
Supported Supported Supported P/DAS support
16,384 XP24000 Disk Array:
65,536
XP20000 Disk Array:
32,768
64 Maximum pairs
8 per logical control unit 8 per logical control unit 4 Maximum paths between
storage systems
1 to 4, default is 4 per LCU.
Requires the Remote Web
Console computer (or SVP)
to change default.
1 to 4, default is 4 per LCU.
Requires the Remote Web
Console computer (or SVP)
to change default.
4 Number of copy operations
on initial copy
Requires main storage
system port to be set to
target by the Remote Web
Console (or SVP) or
automatically in response to
establish and delete path
commands. Requires main storage
system port to be set to
target by the Remote Web
Console (or SVP) or
automatically in response to
establish and delete path
commands. No Dedicated interface between
storage systems
3 or 15, default = 15 tracks 3 or 15, default = 15 tracks 1-255, default is 15 (setting
of 1 copies a maximum of 3
tracks at a time, 2-255
copies a maximum of 15
tracks at a time) PACE parameter initial copy
option
Overview of PPRC Commands 223