HP NC550SFP Dual Port 10GbE Server Adapter - Manual (Page 16)

Configuring and managing the iSCSI Initiator 16
• Check VLAN settings
For more information on what to do if a target verification fails, see "Troubleshooting (on page 37 )."
Target discovery through DHCP
If using target discovery through DHCP, you must add the root path to the DHCP server.
When you have finished adding the root path to the DHCP server, you can enable the Discover Boot
Target via the DHCP option through iSCSISelect.
If the DHCP network and your DHCP server support the DHCP Discovery option, you can use it to provide
the boot path from the DHCP server.
You must manually configure iSCSI boot if you leave the DHCP option Disabled (the default).
1. After you have configured the iSCSI Initiator Name, from the Controller Configuration menu, tab to
Controller Properties and press Enter.
2. From the Controller Properties menu, tab to Discover Boot Target via DHCP and select Enabled.
3. Tab to Save and press Enter.