HP XP7 Storage - Manual (Page 154)

Figure 23 Shared Cnt Ac-J Z volumes with BC Z primary volumes
Configurations with Business Copy Z secondary volumes
The following figure shows a BC Z primary volume used as the production volume. A remote Cnt
Ac-J Z backup copy is made of the BC Z secondary volume. The BC Z pair must be in Split/SUSPOP
status to perform the Cnt Ac-J Z operation.
Figure 24 Shared Cnt Ac-J Z P-VOL with BC Z secondary volume
Pair status and data currency
The table below shows whether the data in a shared volume is current, given the combined status.
BC Z pair status Cnt Ac-J Z pair
status
Suspended/SUSPER Resync/Pending,
Resync-R/REVRSY Split/SUSPOP SP-Pend/TRANS Duplex Pending
Not Current Not Current Current Not Current Not Current Not Current Pending Duplex
Not Current Not Current Current Not Current Not Current Not Current Duplex
Not Current Current Current Current Current Not Current Suspended
Check pair status for shared volumes as follows:
•
For Cnt Ac-J Z, check status of the primary volume or secondary volume.
•
For BC Z, check status of the primary volume.
BC Z supports multiple secondary volumes for each primary volume. When you check pair status,
the system returns status for only one pair—the pair whose secondary volume has the lowest LDEV
ID. To see status for the pairs with a different secondary volume, direct a host query to the specific
secondary volume using the secondary volume’s LDEV ID in the host command.
154 Configurations with Business Copy Z