Vertical repetitive defects, Misformed characters, Page skew – HP LaserJet P2055dn User Manual
Page 133
Vertical repetitive defects
●
The print cartridge might be damaged. If a repetitive mark
occurs at the same spot on the page, install a new
HP print cartridge.
●
The internal parts might have toner on them. If the defects
occur on the back of the page, the problem will probably
correct itself after a few more printed pages.
●
In your printer driver, make sure the appropriate media
type is selected.
Misformed characters
●
If characters are improperly formed, producing hollow
images, the media stock might be too slick. Try a different
media.
●
If characters are improperly formed, producing a wavy
effect, the printer might need service. Print a configuration
page. If the characters are improperly formed, contact an
HP-authorized dealer or service representative.
Page skew
●
Make sure that the media is loaded correctly and the
media guides are not too tight or too loose against the
media stack.
●
The input bin might be too full.
●
Check the media type and quality.
ENWW
Solve print-quality problems 121