HP LaserJet P2055dn - Manual (Page 103)

3. Replace the print cartridge, and close the print-cartridge door.
4. Reconnect the power cord, and turn the product on.
Clean the paper path
During the printing process, paper, toner, and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. This product has
a cleaning mode that can correct and prevent these problems.
1. Open HP ToolboxFX. See View HP ToolboxFX on page 71 .
2. Click the Device Settings folder, and then click the Troubleshooting page.
3. In the area for Cleaning Mode, click Start to begin the cleaning process.
The product processes a single page, and then returns to the Ready state when the cleaning
process is complete.
ENWW Clean the product 91