Setsnmpnotifypolicy, Setsnmpserviceinfo – HP LeftHand P4000 SAN Solutions User Manual

Page 93

HP StoreVirtual CLI | Commands | 93

setSnmpNotifyPolicy

This command sets SNMP Notification Policy settings.

Availability: Windows, SSH
Version: 9.0
Request Syntax

cliq setSnmpNotifyPolicy login= userName= passWord= verbosity= alertOnCritical=

login

Required

The IP addresses or DNS-resolvable names of one or more storage

systems

userName Conditional The authentication user name for the storage system. (Parameters

userName/passWord or groupName must be specified).

passWord Conditional The password for the storage system. (Parameters userName/passWord

or groupName must be specified).

groupName Conditional The name of the management group with cached credentials.

(Parameters userName/passWord or groupName must be specified).

verbosity

Optional

The level of returned information via email notification. 1 - brief, 2 -

standard, 3 - verbose

alertOnInfo Conditional Values are: 0 = do not transmit informational events and, 1 = transmit

informational events. (A combination of parameters alertOnInfo or

alertOnWarning or alertOnCritical must be specified).

alertOnWarning Conditional Values are: 0 = do not transmit warning events and, 1 = transmit

warning events. (A combination of parameters alertOnInfo or

alertOnWarning or alertOnCritical must be specified).

alertOnCritical Conditional Values are: 0 = do not transmit critical events and, 1 = trasmit critical

events. (A combination of parameters alertOnInfo or alertOnWarning or

alertOnCritical must be specified).

Example

cliq setSnmpNotifyPolicy login=10.0.1.3 userName=admin
passWord=secret alertOnWarning=1

cliq setSnmpNotifyPolicy alertOnWarning=1

setSnmpServiceInfo

This command sets information about the SNMP Service.