HP LeftHand P4000 SAN Solutions - Manual (Page 49)

HP StoreVirtual CLI | Commands | 49
Example
cliq discoverTCP groupOrder=1 node=10.1.2.3;10.1.2.4
cliq discoverTCP groupOrder=1 node=10.1.2.3;10.1.2.4
discoverUdp
This command discovers storage systems and management groups on the network, using UDP.
Availability: Windows, SSH
Version: 8.0
Request Syntax
cliq discoverUdp ipMask= ipSubnet=
ipMask Required An IP adderss mask for SNMP notification.
ipSubnet Required An IP Address subnet for SNMP notification.
groupOrder Optional Return storage systems ordered by group membership. This can be one
of: 0 - default, 1
receivePort Optional The TCP port to receive the discovery packets (defaults to an unused
port if unspecified)
waitForData Optional The number of milliseconds to wait for the discovery packets (defaults to
3000 if unspecified)
Example
cliq discoverUdp ipMask=255.255.240.0 ipSubnet=10.0.0.0
cliq discoverUdp ipMask=255.255.240.0 ipSubnet=10.0.0.0
dismountVolume
This command dismounts the volume.
Availability: Windows, SSH
Version: 8.0
Request Syntax
cliq dismountVolume mountPoint=
mountPoint Required The drive letter or mount point on the host for the volume (LUN will be
uninitialized if not specified)
Example
cliq dismountVolume mountPoint=5
cliq dismountVolume mountPoint=5