HP SAN - Manual (Page 26)

1. Click Advanced Settings from the navigation area of the SAN Visibility GUI.
Figure 9 displays the Advanced Settings window.
Figure 9 Advanced settings window
2. Click Load to select an IOCP file.
IMPORTANT:
SAN Visibility does not generate IOCP files.
Removing IOCP files
To remove an IOCP file, complete the following steps:
1. Select the IOCP file you want to remove
2. Click Remove.
The selected IOCP file is removed.
Specifying HBA-Host map details
HBA-Host map file is a .csv file (comma separated file), which contains HBA-Node WWN and host
mapping details. If this map file is provided in the raw report, then the processed report maps the
HBA-Node WWNs to the host names, and the same information is displayed in the processed report.
You can create a new HBA-Host map file or you can import an existing HBA-Host map file.
Using SAN Visibility 26