HP SAN - Manual (Page 24)

Figure 8 Customer Details window
Adding contact details
To add your contact details, complete the following steps:
1. Click Customer Details from the navigation area. Customer Details window appears in the main
display area.
2. Enter your contact information in the Customer Details window.
NOTE:
Ensure that the email address you enter is accurate. SAN Visibility reports are sent to this
email address.
In this release of SAN Visibility, you can enter multiple email address in the E-mail box. The SAN
Visibility reports are sent to all the email addresses provided.
Use semicolon (;) between the email addresses to enter multiple email address.
For example: [email protected]; [email protected]; [email protected]
1. Select Automatically email the collected raw data on completion check box. For more information,
see
Enabling auto emailing of raw data .
2. Enter your SMTP server name or select it from the SMTP Server dropdown box. For more
information, see
Determining the SMTP server IP address .
3. Select the appropriate option if you want to receive additional information (such as special offers,
new product information, events, service or support information) from HP.
Using SAN Visibility 24