HP LaserJet Enterprise M4555 MFP series - Manual (Page 32)

Control-panel layout
7
5
8
6
3 1 4
9
10 14
2
12 13 11
1 Hardware integration port Area for adding third-party security devices
2 Touchscreen graphical display Use the touchscreen to open and set up all product
functions.
3 Brightness-adjustment button Use this button to increase or decrease the brightness of
the touchscreen display.
4 Numeric keypad Use this area to specify the number of copies and other
numeric values.
5 Sleep button If the product is inactive for a long period of time, it
automatically enters a sleep mode. To place the product
into sleep mode or to reactivate the product, press the
Sleep button.
6 Reset button Resets the job settings to factory or user-defined default
values.
7 Stop button Stops the active job and opens the Job Status screen.
8 Start button Begins a copy job, starts digital sending, starts a fax
job, or continues a job that has been interrupted.
9 Pause button Use this button to indicate a required pause for a fax
number.
10 Attention light Indicates that the product has a condition that requires
intervention. Examples include an empty paper tray or
an error message.
11 Data light Indicates that the product is receiving data.
12 Ready light Indicates that the product is ready to begin processing
any job.
13 Backspace button Clears the active text or number field, and returns values
to the default settings.
14 USB port (on the bottom edge of the hinged control
panel) Connect a USB flash drive for walk-up printing and
scanning (use the HP Embedded Web Server Security
tab to enable the port).
12 Chapter 1 Product basics ENWW