HP EliteBook 840 G1 Notebook PC - Manual (Page 61)

Removing the hard drive
To remove a hard drive:
1. Save your work and shut down the computer.
2. Disconnect AC power and external devices connected to the computer.
3. Turn the computer upside down on a flat surface.
4. Remove the service door (see Removing or replacing the service door on page 49 ) and the
battery (see Inserting or removing the battery on page 38 ).
5. Loosen the 4 hard drive door screws (1). Pull the cloth hard drive tab (2) upwards, and then
remove the drive.
Installing a hard drive
NOTE: Your computer may look slightly different from the illustration in this section.
To install the hard drive:
1. Place the hard drive into the hard drive bay, (1), ensuring that the cloth tab remains on top.
Using hard drives 51