HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 63)

Wake Time
An IT administrator can use the Wake Time screen to schedule wake times and sleep delays on a daily
basis. For example, the product can be set to wake up at 07:30, so the product has finished initializing
and calibrating and is ready to use by 08:00. The administrator sets only one wakeup setting per day;
however, each day can have a different wakeup setting. Additionally, to save energy, the sleep delay
can be set to turn the product off after a specific period of inactivity.
Figure 3-20 Sleep Schedule screen
Table 3-13 Sleep Schedule
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server
on page 5 .
2 Wake Time Select one or more days on which to use the wakeup setting, and then set the time
the product is turned on each day.
3 Sleep Delay Set the amount of time the product is idle before it goes into Sleep Mode. When the
product is in Sleep Mode, it uses less energy.
ENWW Wake Time 51