HP StoreEver DAT Tape Drives - Manual (Page 19)

HP StorageWorks DAT Tape Drives User Guide 19
2. Fit the grommet to the cable. Making sure the Type B connector is facing in towards the tape
drive, slide the grommet into the bracket, as illustrated in Figure 9 . Fix the bracket to the server
and use the supplied cable ties to tidy up any excess cable.
Figure 9 Connecting USB cable
3. Attach the Type B connector on the cable to the tape drive and the Type A connector to the
server’s external USB port, as illustrated in Figure 9 .
1 Type A connector, to server’s
external USB port
2 Type B connector, to tape drive
1
2