Using the remote browser method, Internet options screen – HP ProLiant DL585 G2 Storage-Server User Manual
Page 20
NOTE:
You can change the administrator name and password when you configure the server
using the "
2.
To complete network configuration using the Rapid Startup Wizard, see "
Using the remote browser method
The storage server ships with DHCP enabled on the network port. If the server is placed on a
DHCP-enabled network and the serial number of the device is known, the server can be accessed through
a client running Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
•
Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the
storage server
•
DHCP-enabled network
•
Serial number or IP address of the storage server
To connect the server to a network using the remote browser method, you must first ensure that the client
is configured to download signed ActiveX controls.
To enable ActiveX controls
1.
On the remote client machine, open the Internet Explorer web browser and select Tools > Internet
Options > Security.
Figure 1 Internet options screen
2.
On the Security screen, select Internet or Local intranet Web content zone, then click Custom Level.
20
Installing and configuring the server